Widely Used High Quality Best Price Industrial Drying Machine Three
Drum Rotary Drye.
The Three Drum Dryer is a kind of processing large amounts of
material drying machine. Due to the reliable operation, good
adaptability, high yield, widely used in metallurgy, building
materials, fly ash, chemicals, medicine and other materials.
Commonly adapted to the powder and granular materials, can also use
the mixing material approach drying viscous paste-like material or
high water content materials. Especially dry sand.
Three drum structure
This series of machine is mainly composed of a rotary body, lifting
plate, a transmission device, a supporting device and a sealing
ring and other components. With reasonable structure, well made,
high output, low energy consumption, easy operation etc.
Three drum dryer working principle
Wet material in the cylinder after being sent to dryer, inverted
plate for turning, the material in the dryer is uniformly
distributed and decentralized, and full contact with the hot air
gradually from wet to dry. In the process of drying, the material
on the plate with inclined and heat flow, adjustable motion to the
dryer another piece, from the star type discharge valve discharge.
Silica Sand rotary dryer / drying machine Features:
1 Adopted new combined-type feed and feed device, the center of
second material without wind.
2 Cleaning, maintenance is convenient.
3 High heat efficiency.
4 Phenomenon of drying.
5 Reliable performance.
6 Transmission large and small gear pin can change gear, replaced
the traditional gear of cast steel, saving the cost of investment,
and also greatly reduces maintenance costs and time.
Techincal Parameter
| Parameters | YHSS623 |
| Drying capacity | 3-5t/h |
| Diameter of drum | 1650mm |
| Length | 1650mm |
| Motor power | 3kw |
| Reducer model | XWD-5 |
| Speed of drum rotation | 4-10 r/min |
| Max moisture | 15% |
| Moisture of end products | 0.1%-0.8% |
| Max. temperature inside | 700-750℃ |
| Outlet temperature | 30-60℃ |
| Hot-blast Stove dimensions | 2074×1526×2100mm |
| Furnace door | 300×450 mm |
| Quicksand tube | ø273×1250m mm |
| Coal consumption | 7-10 kg/ per ton sand |
Workshop production show
Detailed Image
Our customer
1. Free consultation on technical &commercial issues, provide
market evaluation, project feasibility based on each customers'
condition.
2. Provide free drawings at no cost for factory layout, piping &
wiring systems, installation plannings,
3. Free installation, commissioning and operation training services
at no costs to customers.
4. 24/7 aftersales service, free of charge if repair service
required within 1 year after installation.
