10-13t/h YHSS6210 sand drying machine factory pricewith good
quality and after-sale
Introduction:
triple-pass drying system is the third generation triple-pass dryer
developed from S62 series drying machine. It is characterized by
small occupation area,large handing capacity and high thermal
efficiency. After continuous improvement, TDLT drying system has
reached to international advanced level. It can be used to
efficiently deal with materials with low viscosity and high
moisture content, particles materials and other special materials
such as sand, mineral ore, mineral powder, pomace and medicine
dregs.
Heating Fuel: Coal, Gas, Oil, Biomass fuels, Wood,etc.
Technical Parameter
| Parameters | YHSS6210 |
| Drying capacity | 10-13t/h |
| Diameter of drum | 2000mm |
| Length | 4500mm |
| Motor power | 5.5kwx2 |
| Reducer model | XWD-5 |
| Speed of drum rotation | 4-10 r/min |
| Max moisture | 15% |
| Moisture of end products | 0.1%-0.8% |
| Max. temperature inside | 700-750℃ |
| Outlet temperature | 30-60℃ |
| Hot-blast Stove dimensions | 2576×2026×2650mm |
| Furnace door | 350×450mm |
| Quicksand tube | φ325×1690 mm |
| Coal consumption | 7-10 kg/ per ton sand |
Detialed Image
1.The cyclinder of the dryer:
Material: Use high quality carbon steel or customer specified steel
Internal structure: designed with internal blades and other devices
Seamless welding
Main feature: high quality steel plate, customer can specify steel
plate thickness and steel plate material
Parts:
Material: high quality steel plate, customer can specify steel
plate thickness and steel plate material
Detailed Image
Rotary dryer consists of the cylinder, before and after the roller
circle, a large gear, gear roll, drag roller, a small gear, a
feeding device, lifting plate, reducer, motor, feeding devices and
other components.
Advantages:
1.Compared to single cylinder dryer the machine length shortens
60%, in favour of process arrangement. Reduces workshop covered
area, reduced the project investment by 40%. Occupation area: about
20m 2. Adopted lates technology, cylinder self insulation, thermal
efficiency is as high as 80% (single cylinder dryer is only 35
percent), thermal efficiency than single cylinder drying saves coal
68%, yields 100%.
3. Heat-resisting wear-resisting alloy steel plate, four times than
ordinary steel wear-resisting. Long service life and easy
maintenance. 4. High thermal efficiency, outside shell temperature
below 60 °C (single cylinder dryer outside shell temperature as
high as 150°C), output of low temperature, discharging temperature
below 60 °C. 5. Output of low temperature, be helpful for dust
collector to use a long time, can be directly supporting air tank
pulse bag filter.
6. Construction investment reduces 50%, power consumption reduces
60%. 7. Adopts roller rotation, no need reducer. 8. Hot air stove
can supporting fluidezed bed, spray stove, hands burned furnace,
also used in fuel and gas type, can bake the below 20 mm pieces of
materials, aggregates, powder material. 9. After drying the
moisture content of materials at 0.5% and below, which can meet
different industries requirement.
Our Service
Pre-sale
1. According to your needs, select right model for you.
2. According to your special requirements, design customized
solution and manufacture customized products for you.
3. Welcome your visit.
Sale
1. Sign contract, pay deposit, we arrange production.
2. Product acceptance.
3. Help you formulate construction scheme.
After-sale
1. Assign engineer service for you on-site freely.
2. Install and adjust device, train how to operate.
3. After installation, leaving 1-2 technical staff to help you
on-site production, until achieve customer satisfaction.
