380V supply voltage good quality vibrating feeder vibrating feeding
machine
Product details
This company produces the feeder for large capacity of heavy
industrial design, mechanical vibration unit is also heavy two-axis
structure, gear, oil lubrication,type eccentric block weight and
impact Angle is adjustable, full series motors are all through the
shaft bridge drive feeder, can also be equipped with frequency
conversion control cabinet and install speed motor to control the
feeding capacity.
The electromagnetic feeder is applicable to products which is
easy-broken, easy-separated and coated with flavouring, such as:
baked food, snack food, potato chips, frozen food, peanut,
confectionery that are with high requirement of convey system.No
breakage of single machine. When comparing with common vibratory
conveyor , the products’ breakage rate reduces about 50% and
seasoning loss rate reduces 70%.Dynamic distributions of product at
each convey point, multi-conveyor linkage for long distance
transportation, multi-conveyor synchronization and in-phase
transmission.
Working principle
When the power is on, the electric current passes through the
excitation coils, which creates a magnetic field. The magnetic
force changes into vibratingforce, which forces the feeding trough
body to make simple harmonic vibration or similar to simple
harmonic vibration in a certain direction. When the acceleration of
its vibration achieves some certain value, the materials will make
continuous and small throws or slides along the transmission
direction in the feeding trough body, which causes the forward
motion and transmission of the materials.
Technical parameters
| Model | Productivity (t/h) | Feeding size (mm) | Supply Voltage (V) | Matching control box model | Weight (kg) |
| GZ1 | 5 | 50 | 220 | XKZ-5G2 | 73 |
| GZ2 | 10 | 50 | 220 | XKZ-5G2 | 146 |
| GZ3 | 25 | 75 | 220 | XKZ-5G2 | 217 |
| GZ4 | 50 | 100 | 220 | XKZ-20G2 | 412 |
| GZ5 | 100 | 150 | 220 | XKZ-20G2 | 656 |
| GZ6 | 150 | 200 | 380 | XKZ-20G3 | 1252 |
| GZ7 | 250 | 250 | 380 | XKZ-100G3 | 1920 |
| GZ8 | 400 | 300 | 380 | XKZ-100G3 | 3040 |
| GZ9 | 600 | 350 | 380 | XKZ-200G3 | 3750 |
| GZ10 | 750 | 500 | 380 | XKZ-200G3 | 6491 |
| GZ11 | 1000 | 500 | 380 | XKZ-200G3 | 7680 |
Features:
Motor Vibrating Feeder is widely used in metallurgy, coal,
electronics, machinery, chemical industry, building materials,
light industry, food and other industrial and mining enterprises,
in the production process, for the massive, granular and powdery
materials from the storage silo or hopper quantitative continuously
and evenly to the receiving device. Compared with other feeding
device has the following characteristics:
(1) the use of electrical control thyristor half wave rectifier
circuit. Can be stepless adjustment of the feed rate, and can be
used for automatic control in the production process, production
automation.
(2) the electromagnetic vibration feeder no rotating parts, no need
of lubrication, simple structure, convenient maintenance.
(3) the material in micro projectile motion, groove wear small,
(4) the electromagnetic vibration feeder trough alloy steel, can be
used for conveying high temperature, wear and corrosion of
materials etc.
The actual capacity is greater than or less than the calculated
capacity, productivity conversion according to the actual material
capacity.
Particle size of less than 1mm material conveying speed decreased
and water content more than 10% wet sticky materials can not be
normal delivery, material thickness exceeds a certain value, will
hinder the normal feeding, recommended H= (1/3~1/4) slot.
For special requirements, special specifications, special design
and manufacture can I plant.
